Galini 3D Printed Sleeping Pod Tiny Houses

I'm fascinated by the idea of a self-sufficient house, which I first read about in Arthur C. Clarke's Childhood's End.

I since discovered an earlier, and more detailed, literary exploration of this idea in Clifford Simak's 1952 story Ring Around the Sun:

"The houses are prefabricated units," said Crawford, "and they sell at the flat rate of five hundred dollars a room — set up. You can trade in your old home on them at a fantastic trade-in value and the credit terms are liberal — much more liberal, I might add, than any sane financing institution would ever countenance. They are heated and air conditioned by a solar plant that tops anything — you hear me, _anything_ — that we have today. There are many other features, but that gives you a rough idea....

"When you buy one of them, you don't need to tie up to an electric outlet...."
(Read more about solar-powered, prefab houses)

Take a look at a planned implementation of this cool idea, the Galini Sleeping Pods for Monterey, California.




(Galini sleeping pods)

The Galini Sleeping Pod builds on DFA’s experience envisioning one-off solutions for environmentally sensitive or challenged sites, in addition to its expertise integrating urban, architectural and interior design.The Galini Sleeping Pod is designed as a fully self-sustaining, zero impact structure. The 300-square-foot sleeping accommodation with shower, sink and toilet can be shipped to remote locations and placed in the landscape with very little impact on the site natural system. Four legs covering 13-square-feet in total suspend the pod off the ground allowing for plants and animals to not be displaced and exist beneath. Drawing its water supply from an atmospheric water generator and recycling all wastewater by means of organic filtration, the pod has no impact on the local environment and local water table. The electrical supply is generated through the combination of both wind and solar technology. Galini’s structure is 97% waste efficient in its construction through the use of 3D printed technology,consisting of a Carbon Fiber Infused Bio-Material that can be skinned in various materials according to needs. DFA has worked alongside Branch Technologies, out of Tennessee, to develop the 3D printing Structure.

(Via d-f-a.)

Scroll down for more stories in the same category. (Story submitted 6/1/2018)

Follow this kind of news @Technovelgy.

| Email | RSS | Blog It | Stumble | del.icio.us | Digg | Reddit |

Would you like to contribute a story tip? It's easy:
Get the URL of the story, and the related sf author, and add it here.

Comment/Join discussion ( 0 )

Related News Stories - (" Living Space ")

Kinetic Buildings And Psychotropic Houses
'There was a dim whirring, and the spheres tipped and began to rotate...' - JG Ballard, 1962.

Jupe Urban Escape Pods Have Tesla, SpaceX Roots
'The houses are prefabricated units... and they sell at the flat rate of five hundred dollars a room — set up.' - Clifford Simak, 1952.

3D Printed Dubai Building Is World's Largest
'This thing will start at one end of ...a house and build it complete to the other end, following drawings only.' - Murray Leinster, 1945.

Driverless Hotel Rooms Predicted In 1828
'Did you never see a moving house before?' - Jane Webb Loudon, 1828.

 

Google
  Web TechNovelgy.com   

Technovelgy (that's tech-novel-gee!) is devoted to the creative science inventions and ideas of sf authors. Look for the Invention Category that interests you, the Glossary, the Invention Timeline, or see what's New.

 

 

 

 

 

Current News

Las Vegas Tunnels To Have Autonomous Teslas
'...just a steady velvety whirr as the taxi sped along.'

TCL CSOT 17-Inch Printed OLED Scrolling Display
'..a wide sheet of clear material suddenly flared with light and swirling colour.'

Reachy Humanoid VR Teleoperation App
"I went to the control room where the three other men were manipulating their mechanical men...'

Unitree A1 Robot ala Black Mirror and Snow Crash
'The legs are long, curled way up to deliver power...'

DALL-E Makes Creative Images From Text
Okay, sf fans. If you could have some art created from a science fiction sentence, what sentence would you pick?

BladeBUG Robots Clean Massive Wind Turbine Blades
'There were the cleaners, with large padded feet, who were apparently polishing their way the whole length...'

Looms To Manually Weave Lunar Rover Wheels
It's fascinating to me how the Apollo program forced people to think outside their usual boxes.

IceBot Antarctic (Planetary?) Robotic Explorers Made Of Ice
'Some will combine in place to form more complicated structures, like excavators or centipedes.'

Glad 2020 Is Over
Maybe you missed one of these?

PEDOT Polymer Could Enhance Brain-Machine Interfaces
'the hair-fine wire going deep into Owen's brain, down into the pleasure center.'

Study: Robots Encourage Humans To Take Risks
Not exactly Three Laws compliant.

Kinetic Buildings And Psychotropic Houses
'There was a dim whirring, and the spheres tipped and began to rotate...'

Jupe Urban Escape Pods Have Tesla, SpaceX Roots
'The houses are prefabricated units... and they sell at the flat rate of five hundred dollars a room — set up.'

Best Robot Dance Video Of 2020
'I can Mashed Potato... I can do the Twist.'

Vertical Farm In Singapore's Output Is 1.5 Tons Per Day
'A towering eighty-story structure like the office "In-and-Out" baskets stacked up to the sky.'

3D Printed 'Blisk' Manufactured In Orbit
'It can be mass-produced only in the orbiting factories...'

More SF in the News Stories

More Beyond Technovelgy science news stories

Home | Glossary | Invention Timeline | Category | New | Contact Us | FAQ | Advertise |
Technovelgy.com - where science meets fiction™

Copyright© Technovelgy LLC; all rights reserved.